12.7 mm Flat Top Modular Belt for Food Conveying
XCY12701A- Pitch
- 12.7 mm
- Thickness
- 8.8 mm
- Pin Ø
- 5 mm
- Width Min.
- 76 mm
- Backflex Radius
- 20 mm
XCY12700B1 · Modular belts
12.7 mm Pitch Open Grid Modular Belt
A 25% open grid lets water pass through while the short pitch suits compact conveyor layouts. Choose the belt width for your product footprint.
Product Inquiry
10hours
Usual reply time
Similar & related products
CHECK THE DETAILS
Specifications
Compare belt dimensions and material performance to check your conveyor fit, load and operating conditions.
| Units | Pitch | Thickness | Pin Ø | Width Min. | Backflex Radius | Width Increment | Open Area |
|---|---|---|---|---|---|---|---|
| mm | 12.7 | 10 | 5 | 10 | 50 | 25 % | |
| in | 0.5 | 0.394 | 0.197 | 0.394 | 1.969 |
| Dimension | mm | in |
|---|---|---|
| Pitch | 12.7 | 0.5 |
| Thickness | 10 | 0.394 |
| Pin Ø | 5 | 0.197 |
| Width Min. | ||
| Backflex Radius | 10 | 0.394 |
| Width Increment | 50 | 1.969 |
| Open Area | 25 % | |
| Belt Material | Rod Material | Working Load | Belt Weight | Temperature Range |
|---|---|---|---|---|
| POM | PP | 16000 N/m at 21 °C | 7.2 kg/m² | 0–85 °C |
| POM | PA | 18000 N/m at 21 °C | 7.3 kg/m² | -5–85 °C |
| PP | PP | 11000 N/m at 21 °C | 5.2 kg/m² | 0–105 °C |
| PE | PE | 7000 N/m at 21 °C | 5.4 kg/m² | -45–65 °C |
Nominal belt width W (mm): standard W = 50 × N; non-standard W = 50 × N + 16.67 × n. N counts 50 mm width units; n counts additional 16.67 mm increments. Both are whole-number counts. Modules: 50 / 100 mm at the edges and 150 mm in the centre.
CHECK BEFORE ORDERING
Check dimensions. Match the parts.
Share belt or chain photos (both sides), sprocket and interface photos, key dimensions, conveyed product details, operating conditions and special requirements.
Check FitDimensions & installation
Provide belt or chain width, loop length and available installation and return clearance.
Allow for running clearance; nominal width alone is not an installation check.Sprockets & matching parts
Share sprocket photos, tooth count, shaft bore dimensions and equipment interfaces.
Matching pitch alone does not establish sprocket compatibility.Product & operating conditions
Provide product size and weight, line speed, transfer gaps, temperature and cleaning conditions.
Confirm the configuration for the actual process before ordering.PRODUCT QUESTIONS
FAQ
More answers about product selection, installation and maintenance.
Can it carry small loose parts?
Only when their shape and size remain supported across the openings and joints. For very small or flexible parts, compare the actual contact area with a flat top belt.
Can the belt remove all surface water?
The openings allow free water to drain; they do not dry the package surface. Air knives or another drying stage may be needed before labelling or packing.
Does the short pitch define the transfer gap?
No. Transfer geometry also depends on sprocket size, end support, belt tension and the receiving conveyor. Use the complete end arrangement to determine the gap.
PLAN YOUR INSTALLATION
Product Documents
Get belt specifications, sprocket data and installation drawings to check dimensions and plan your equipment.
Dimensions & materials
Dimensions, materials, working load and operating conditions.
Sprockets & drive fit
Tooth counts, bore sizes and sprocket dimensions for drive matching.
Drawings & installation
Product geometry, mounting dimensions and installation clearances.
Tell us the model and the documents you need for selection or installation.
Request Documents
