12.7 mm Flat Top Modular Belt for Food Conveying
XCY12701A- Pitch
- 12.7 mm
- Thickness
- 8.8 mm
- Pin Ø
- 5 mm
- Width Min.
- 76 mm
- Backflex Radius
- 20 mm
XCY254010A · Modular belts
25.4 mm Flat Top Modular Belt for Straight Conveyors
A 25.4 mm-pitch flat top modular belt for straight conveying, shown without flights or sideguards. Match width and material to your line.
Product Inquiry
10hours
Usual reply time
Similar & related products
CHECK THE DETAILS
Specifications
Compare belt dimensions and material performance to check your conveyor fit, load and operating conditions.
| Units | Pitch | Thickness | Pin Ø | Width Min. | Backflex Radius | Width Increment | Open Area |
|---|---|---|---|---|---|---|---|
| mm | 25.4 | 10 | 5 | 50 | 25 | 50 | 0 % |
| in | 1 | 0.394 | 0.197 | 1.969 | 0.984 | 1.969 |
| Dimension | mm | in |
|---|---|---|
| Pitch | 25.4 | 1 |
| Thickness | 10 | 0.394 |
| Pin Ø | 5 | 0.197 |
| Width Min. | 50 | 1.969 |
| Backflex Radius | 25 | 0.984 |
| Width Increment | 50 | 1.969 |
| Open Area | 0 % | |
| Belt Material | Rod Material | Working Load | Belt Weight | Temperature Range |
|---|---|---|---|---|
| POM | Metal | 37000 N/m at 21 °C | 14.5 kg/m² | -40–85 °C |
| POM | PA | 33500 N/m at 21 °C | 9.3 kg/m² | -40–85 °C |
| POM | PBT | 33500 N/m at 21 °C | 9.6 kg/m² | -40–85 °C |
| PP | PP | 20000 N/m at 21 °C | 6.9 kg/m² | 0–100 °C |
| PE | PE | 12000 N/m at 21 °C | 7.1 kg/m² | -45–65 °C |
Surface: Flat top. Running direction: Straight running. Shown configuration: Flat top belt without flights or sideguards.
CHECK BEFORE ORDERING
Check dimensions. Match the parts.
Share belt or chain photos (both sides), sprocket and interface photos, key dimensions, conveyed product details, operating conditions and special requirements.
Check FitDimensions & installation
Provide belt or chain width, loop length and available installation and return clearance.
Allow for running clearance; nominal width alone is not an installation check.Sprockets & matching parts
Share sprocket photos, tooth count, shaft bore dimensions and equipment interfaces.
Matching pitch alone does not establish sprocket compatibility.Product & operating conditions
Provide product size and weight, line speed, transfer gaps, temperature and cleaning conditions.
Confirm the configuration for the actual process before ordering.PRODUCT QUESTIONS
FAQ
More answers about product selection, installation and maintenance.
Does the shown belt include flights or sideguards?
The shown configuration is a plain flat top without flights or sideguards. If the process needs product retention on an incline or at the sides, specify that requirement as a separate configuration.
Can I use specifications from a version fitted with flights?
Use dimensions and performance data for the ordered configuration. Added flights or sideguards change the installation and return-clearance requirements; their data must not be assumed to describe this plain belt.
Can the modular width be selected from the photographed sample?
The sample shows a particular module arrangement. Order by the required finished width and conveyor clearance, then confirm the module combination for that width.
PLAN YOUR INSTALLATION
Product Documents
Get belt specifications, sprocket data and installation drawings to check dimensions and plan your equipment.
Dimensions & materials
Dimensions, materials, working load and operating conditions.
Sprockets & drive fit
Tooth counts, bore sizes and sprocket dimensions for drive matching.
Drawings & installation
Product geometry, mounting dimensions and installation clearances.
Tell us the model and the documents you need for selection or installation.
Request Documents
