A closed carrying face
The flat modular surface provides support beneath cartons and board stacks without the large openings of a grid belt.
XCY25409A · Modular belts
Flat Top Packaging Conveyor Belt
A 25.4 mm-pitch flat top modular belt for straight conveying of cartons and packaged products.
Product Inquiry
10hours
Usual reply time
BUILT FOR YOUR PROCESS
Applications & Features
Review conveying applications, design features and operating conditions before choosing a belt or chain.
Replace the affected section
Transverse connecting rods join the belt rows. Local replacement allows serviceable belt sections to remain in use.
Configure the carrying width
Module combinations allow the carrying width to be configured for the conveyor. Share the required finished width so we can confirm the module arrangement and matching components.
Pricing & delivery
Share your required specifications, quantity, delivery location and target date, plus any special requirements. We aim to reply within 10 hours.
CHECK THE DETAILS
Specifications
Compare belt dimensions and material performance to check your conveyor fit, load and operating conditions.
| Units | Pitch | Thickness | Pin Ø | Width Min. | Backflex Radius | Width Increment | Open Area |
|---|---|---|---|---|---|---|---|
| mm | 25.4 | 8.8 | 5.0 | 76 | 40 | 76 | 0 % |
| in | 1 | 0.346 | 0.197 | 2.992 | 1.575 | 2.992 |
| Dimension | mm | in |
|---|---|---|
| Pitch | 25.4 | 1 |
| Thickness | 8.8 | 0.346 |
| Pin Ø | 5.0 | 0.197 |
| Width Min. | 76 | 2.992 |
| Backflex Radius | 40 | 1.575 |
| Width Increment | 76 | 2.992 |
| Open Area | 0 % | |
| Belt Material | Rod Material | Working Load | Belt Weight | Temperature Range |
|---|---|---|---|---|
| POM | Metal | 35000 N/m at 21°C | 13.8 kg/m² | -40–85 °C |
| POM | PA | 32000 N/m at 21°C | 8.4 kg/m² | -40–85 °C |
| POM | PBT | 32000 N/m at 21°C | 8.7 kg/m² | -40–85 °C |
| PP | PP | 17000 N/m at 21°C | 5.4 kg/m² | 0–100 °C |
| PE | PE | 15000 N/m at 21°C | 5.9 kg/m² | -60–60 °C |
Surface: Flat top. Running direction: Straight running. Connection: Transverse rods.
CHECK BEFORE ORDERING
Check dimensions. Match the parts.
Share belt or chain photos (both sides), sprocket and interface photos, key dimensions, conveyed product details, operating conditions and special requirements.
Check FitDimensions & installation
Provide belt or chain width, loop length and available installation and return clearance.
Allow for running clearance; nominal width alone is not an installation check.Sprockets & matching parts
Share sprocket photos, tooth count, shaft bore dimensions and equipment interfaces.
Matching pitch alone does not establish sprocket compatibility.Product & operating conditions
Provide product size and weight, line speed, transfer gaps, temperature and cleaning conditions.
Confirm the configuration for the actual process before ordering.PRODUCT QUESTIONS
FAQ
More answers about product selection, installation and maintenance.
Does the closed top make the conveyor liquid-tight?
No. The flat carrying face supports cartons and sheets, but its joints and edges do not form a sealed surface. Use a separate collection or containment arrangement where liquid control is required.
Can the load rating be treated as the weight of one board stack?
No. The rating is a tensile working load per metre of belt width at the stated test temperature. Stack weight, belt support, conveyor length, speed and operating conditions must be assessed together.
Are the POM rows interchangeable because the belt body is the same?
The rows use different rod materials and have different listed load and weight values. Specify the complete belt and rod combination; do not apply one row's performance to another.
Can I replace one damaged module without changing the complete belt?
The transverse rod connections allow local section replacement. Stop and isolate the conveyor, then inspect neighbouring modules, rods and drive components for wear. Reinstall and secure the connections before returning the conveyor to service.
Should the ordered width equal the width of the board stack?
Use the required product-support area, guide positions and conveyor clearances to select the finished belt width. The stack width alone does not define the module arrangement or the installation clearance.
PLAN YOUR INSTALLATION
Product Documents
Get belt specifications, sprocket data and installation drawings to check dimensions and plan your equipment.
Dimensions & materials
Dimensions, materials, working load and operating conditions.
Sprockets & drive fit
Tooth counts, bore sizes and sprocket dimensions for drive matching.
Drawings & installation
Product geometry, mounting dimensions and installation clearances.
Tell us the model and the documents you need for selection or installation.
Request Documents
