Flat Top Belt for PET Containers
XCY19050A- Pitch
- 19.05 mm
- Thickness
- 8.7 mm
- Pin Ø
- 5 mm
- Backflex Radius
- 25 mm
XCY19051A · Modular belts
Flat Top Container Conveyor Belt
A flat top modular belt with inset edge retainers for straight conveying of containers and packaged products.
Product Inquiry
10hours
Usual reply time
Similar & related products
BUILT FOR YOUR PROCESS
Applications & Features
Review conveying applications, design features and operating conditions before choosing a belt or chain.
Bottled beverage inspection
Continuous support
The closed carrying face supports bottle bases between guide rails.
Clear product access
A flat top leaves the containers accessible for visual checks.
Line-specific setup
Match lane spacing, guide height and transfer gaps to the actual bottle shape.
Positive drive with matched sprockets
Matched sprockets engage the belt underside to transmit drive force without relying solely on friction. Confirm the sprocket profile, tooth count and shaft connection for your conveyor.
Flexible return-path layout
A minimum backflex radius of 25 mm supports compact return-path arrangements. Check the reverse bend, belt support and available clearance for the conveyor layout.
Replace individual modules
Transverse rods connect the belt modules. Worn or damaged modules can be replaced locally while serviceable belt sections remain in use.
Pricing & delivery
Share your required specifications, quantity, delivery location and target date, plus any special requirements. We aim to reply within 10 hours.
CHECK THE DETAILS
Specifications
Compare belt dimensions and material performance to check your conveyor fit, load and operating conditions.
| Units | Pitch | Thickness | Pin Ø | Width Min. | Backflex Radius | Width Increment | Open Area |
|---|---|---|---|---|---|---|---|
| mm | 19.05 | 8.7 | 4.8 | 228 | 25 | 0 % | |
| in | 0.75 | 0.343 | 0.189 | 8.976 | 0.984 |
| Dimension | mm | in |
|---|---|---|
| Pitch | 19.05 | 0.75 |
| Thickness | 8.7 | 0.343 |
| Pin Ø | 4.8 | 0.189 |
| Width Min. | 228 | 8.976 |
| Backflex Radius | 25 | 0.984 |
| Width Increment | ||
| Open Area | 0 % | |
| Belt Material | Rod Material | Working Load | Belt Weight | Temperature Range |
|---|---|---|---|---|
| POM | PP | 29,000 N/m at 21 °C | 8.9 kg/m² | 0–85 °C |
| POM | PA | 30,000 N/m at 21 °C | 9.0 kg/m² | -5–85 °C |
| PP | PP | 16,000 N/m at 21 °C | 6.0 kg/m² | 0–105 °C |
Surface: Flat top. Running direction: Straight running. Belt materials: POM / PP.
CHECK BEFORE ORDERING
Check dimensions. Match the parts.
Share belt or chain photos (both sides), sprocket and interface photos, key dimensions, conveyed product details, operating conditions and special requirements.
Check FitDimensions & installation
Provide belt or chain width, loop length and available installation and return clearance.
Allow for running clearance; nominal width alone is not an installation check.Sprockets & matching parts
Share sprocket photos, tooth count, shaft bore dimensions and equipment interfaces.
Matching pitch alone does not establish sprocket compatibility.Product & operating conditions
Provide product size and weight, line speed, transfer gaps, temperature and cleaning conditions.
Confirm the configuration for the actual process before ordering.PRODUCT QUESTIONS
FAQ
More answers about product selection, installation and maintenance.
Can it run on a curved conveyor?
This product is presented for straight-running conveyors. For a curved route, send the layout so we can select a radius belt.
Does the brown colour specify the material?
No. Specify the belt and rod material separately when ordering.
Can I replace an existing belt using pitch alone?
No. Confirm the width, underside geometry, sprocket engagement, rod arrangement and operating conditions before selecting a replacement.
PLAN YOUR INSTALLATION
Product Documents
Get belt specifications, sprocket data and installation drawings to check dimensions and plan your equipment.
Dimensions & materials
Dimensions, materials, working load and operating conditions.
Sprockets & drive fit
Tooth counts, bore sizes and sprocket dimensions for drive matching.
Drawings & installation
Product geometry, mounting dimensions and installation clearances.
Tell us the model and the documents you need for selection or installation.
Request Documents
