Flat Top Packaging Conveyor Belt
XCY25409A- Pitch
- 25.4 mm
- Thickness
- 8.8 mm
- Pin Ø
- 5.0 mm
- Width Min.
- 76 mm
- Backflex Radius
- 40 mm
XCY12701A · Modular belts
12.7 mm Flat Top Modular Belt for Food Conveying
A 12.7 mm pitch flat-top modular belt with a closed carrying surface for meat, poultry, seafood and fruit conveying.
Product Inquiry
10hours
Usual reply time
Similar & related products
BUILT FOR YOUR PROCESS
Applications & Features
Review conveying applications, design features and operating conditions before choosing a belt or chain.
Meat portion inspection
Support each portion
The flat, closed top carries trimmed cuts between workstations and gives operators a clear view of the product.
Keep the working area accessible
A straight carrying section leaves the product within reach for inspection and sorting. The conveyor layout sets the working width and access.
Prepare for cleaning
The exposed top face is accessible for rinsing and brushing. Choose belt and rod materials to suit the water, cleaning chemicals and operating temperature.
Keep small pieces supported
The closed, 0% open-area surface supports small cuts and loose portions across the belt. Its flat top gives products an even carrying face.
Build the width around your line
Build different line widths from the same modular belt design. Modules combine across the belt to match the carrying area to the product arrangement.
Replace the affected modules
Individual modules are replaceable, so maintenance can focus on the worn or damaged section while serviceable modules stay in use.
Pricing & delivery
Share your required specifications, quantity, delivery location and target date, plus any special requirements. We aim to reply within 10 hours.
CHECK THE DETAILS
Specifications
Compare belt dimensions and material performance to check your conveyor fit, load and operating conditions.
| Units | Pitch | Thickness | Pin Ø | Width Min. | Backflex Radius | Width Increment | Open Area |
|---|---|---|---|---|---|---|---|
| mm | 12.7 | 8.8 | 5 | 76 | 20 | 76 | 0 % |
| in | 0.5 | 0.346 | 0.197 | 2.992 | 0.787 | 2.992 |
| Dimension | mm | in |
|---|---|---|
| Pitch | 12.7 | 0.5 |
| Thickness | 8.8 | 0.346 |
| Pin Ø | 5 | 0.197 |
| Width Min. | 76 | 2.992 |
| Backflex Radius | 20 | 0.787 |
| Width Increment | 76 | 2.992 |
| Open Area | 0 % | |
| Belt Material | Rod Material | Working Load | Belt Weight | Temperature Range |
|---|---|---|---|---|
| POM | Metal | 17000 N/m at 21 °C | 18.4 kg/m² | -40–85 °C |
| POM | PA | 19000 N/m at 21 °C | 8.2 kg/m² | -40–85 °C |
| POM | PBT | 17500 N/m at 21 °C | 8.5 kg/m² | -40–80 °C |
| PP | PP | 12000 N/m at 21 °C | 6.0 kg/m² | 0–100 °C |
| PE | PE | 8000 N/m at 21 °C | 5.9 kg/m² | -45–65 °C |
Nominal belt width W (mm): standard W = 76 × N; non-standard W = 76 × N + 12.72 × n. N counts 76 mm width units; n counts additional 12.72 mm increments. Both are whole-number counts. Module widths: 76 / 152 mm.
CHECK BEFORE ORDERING
Check dimensions. Match the parts.
Share belt or chain photos (both sides), sprocket and interface photos, key dimensions, conveyed product details, operating conditions and special requirements.
Check FitDimensions & installation
Provide belt or chain width, loop length and available installation and return clearance.
Allow for running clearance; nominal width alone is not an installation check.Sprockets & matching parts
Share sprocket photos, tooth count, shaft bore dimensions and equipment interfaces.
Matching pitch alone does not establish sprocket compatibility.Product & operating conditions
Provide product size and weight, line speed, transfer gaps, temperature and cleaning conditions.
Confirm the configuration for the actual process before ordering.PRODUCT QUESTIONS
FAQ
More answers about product selection, installation and maintenance.
Why do belt and rod materials need to be specified together?
The material table describes complete belt and rod combinations. Load and temperature values belong to their corresponding row; selecting the belt body alone leaves the connecting-rod specification unresolved.
Is a module width the width I should put on an order?
Order the required finished belt width. Module widths describe the parts used to build that width, while the final arrangement must fit the conveyor supports, guides and running clearance.
Will a 12.7 mm pitch belt fit my existing conveyor?
Pitch alone does not confirm compatibility. Include the existing belt and sprocket photos, tooth count, belt width, transfer gaps and return-path dimensions when requesting a fit check.
Does a closed top mean the belt is liquid-tight?
No. The carrying face provides continuous product support, but the joints and edges do not form a sealed surface. A process that must contain liquid needs a suitable collection and containment arrangement.
PLAN YOUR INSTALLATION
Product Documents
Get belt specifications, sprocket data and installation drawings to check dimensions and plan your equipment.
Dimensions & materials
Dimensions, materials, working load and operating conditions.
Sprockets & drive fit
Tooth counts, bore sizes and sprocket dimensions for drive matching.
Drawings & installation
Product geometry, mounting dimensions and installation clearances.
Tell us the model and the documents you need for selection or installation.
Request Documents
