Dimensions & installation
Provide belt or chain width, loop length and available installation and return clearance.
Allow for running clearance; nominal width alone is not an installation check.XCY1700 · Conveyor chains
55 mm Plastic Multiflex Conveyor Chain
A 55 mm wide multiflex conveyor chain with POM links and a 50 mm pitch. Articulated, pin-connected links form the conveying run.
Product Inquiry
10hours
Usual reply time
CHECK THE DETAILS
Specifications
Compare chain specifications and material performance to check conveyor fit, load and operating conditions.
| Specification | Units | Width | Pitch | Backflex Radius | Side-flex Radius | Pin Diameter | Weight (kg/m) |
|---|---|---|---|---|---|---|---|
| 1700 | mm | 55 | 50 | 75 | 150 | 8 | 1.37 |
| in | 2.16 | 1.969 | 3 | 6 | 0.315 |
| Characteristic | Colour | Chain Material | Roller Material | Pin Material | Tensile load (N) | Conveyor Length (m) | Speed (m/min) | Service Temperature (°C) |
|---|---|---|---|---|---|---|---|---|
| White | POM | / | SUS202 | <4000 | ≤10 | <60 | -35–90 |
CHECK BEFORE ORDERING
Check dimensions. Match the parts.
Share belt or chain photos (both sides), sprocket and interface photos, key dimensions, conveyed product details, operating conditions and special requirements.
Check FitSprockets & matching parts
Share sprocket photos, tooth count, shaft bore dimensions and equipment interfaces.
Matching pitch alone does not establish sprocket compatibility.Product & operating conditions
Provide product size and weight, line speed, transfer gaps, temperature and cleaning conditions.
Confirm the configuration for the actual process before ordering.PRODUCT QUESTIONS
FAQ
More answers about product selection, installation and maintenance.
Is the 55 mm chain width the maximum pallet width?
No. It is the width of one chain run. The support arrangement must suit the pallet or crate base, including the spacing and number of supporting runs.
Does multiflex construction remove the need for a guide track?
No. Articulated links allow the chain to bend, while the conveyor track supports and guides its movement. Check the track profile, curve layout and return clearance for the selected chain.
Can the side-flex radius be used to size the return bend?
No. Side-flex and backflex describe different bending directions. Check the horizontal curves and the vertical return path separately; one radius does not replace the other.
Can I replace a damaged link instead of the complete chain?
Pin-connected links allow local replacement. Inspect the adjacent links, pins, track and drive as well, since replacing one link will not correct wear elsewhere. Stop and isolate the conveyor before maintenance.
PLAN YOUR INSTALLATION
Product Documents
Get belt specifications, sprocket data and installation drawings to check dimensions and plan your equipment.
Dimensions & materials
Dimensions, materials, working load and operating conditions.
Sprockets & drive fit
Tooth counts, bore sizes and sprocket dimensions for drive matching.
Drawings & installation
Product geometry, mounting dimensions and installation clearances.
Tell us the model and the documents you need for selection or installation.
Request Documents
