Radius Flush Grid Modular Belt
XCY25407W- Pitch
- 25.4 mm
- Thickness
- 11 mm
- Pin Ø
- 5 mm
- Backflex Radius
- 30 mm
XCY25406W · Modular belts
55% Open Radius Modular Conveyor Belt
An open modular belt for conveyor curves. Its 25.4 mm pitch and side-flexing construction combine product transport with through-belt airflow.
Product Inquiry
10hours
Usual reply time
Similar & related products
CHECK THE DETAILS
Specifications
Compare belt dimensions and material performance to check your conveyor fit, load and operating conditions.
| Units | Pitch | Thickness | Pin Ø | Width Min. | Backflex Radius | Width Increment | Open Area |
|---|---|---|---|---|---|---|---|
| mm | 25.4 | 12.7 | 5 | 25 | 76 | 55 % | |
| in | 1 | 0.5 | 0.197 | 0.984 | 2.992 |
| Dimension | mm | in |
|---|---|---|
| Pitch | 25.4 | 1 |
| Thickness | 12.7 | 0.5 |
| Pin Ø | 5 | 0.197 |
| Width Min. | ||
| Backflex Radius | 25 | 0.984 |
| Width Increment | 76 | 2.992 |
| Open Area | 55 % | |
| Belt Material | Rod Material | Working Load | Belt Weight | Temperature Range |
|---|---|---|---|---|
| POM | PP | 25000 N/m at 21 °C | 10.0 kg/m² | 0–85 °C |
| POM | PA | 29000 N/m at 21 °C | 10.1 kg/m² | -5–85 °C |
| PP | PP | 16000 N/m at 21 °C | 6.5 kg/m² | 0–105 °C |
Minimum inside turning radius: 2.3 × belt width; 2.5 × belt width is preferred. Standard nominal width: W = 76 × N mm, where N is the whole-number count of 76 mm width units. Module widths: 76 / 152 mm; the 82 mm fixed-width option is separate. Actual width can be 0.1–0.3% below nominal due to material shrinkage.
CHECK BEFORE ORDERING
Check dimensions. Match the parts.
Share belt or chain photos (both sides), sprocket and interface photos, key dimensions, conveyed product details, operating conditions and special requirements.
Check FitDimensions & turning layout
Provide belt width, loop length, inner turn radius, turn angle and a conveyor layout with entry and exit sections.
Check the turn radius against belt width; backflex radius is not a horizontal turning radius.Sprockets & curve guides
Share sprocket photos, tooth count, shaft bore dimensions, and curve guide and support details.
Matching pitch alone does not establish sprocket compatibility.Product & operating conditions
Provide product base shape, size and weight, speed, transfer gaps, temperature and cleaning conditions.
Check product support through the curve and at entry and exit transfers.PRODUCT QUESTIONS
FAQ
More answers about product selection, installation and maintenance.
Does the backflex radius determine the horizontal curve?
No. Backflex describes bending in the return direction. The horizontal layout uses the inside turning-radius relationship to belt width.
Is this the version with hold-down tabs?
This is the base side-flexing belt. Guided and hook-wing versions are separate configurations; do not assume their hold-down features are included.
Can a wider belt run on the same corner?
A width change also changes the required inside turning radius. Check the curve layout, guide position and usable pack path together before changing width.
PLAN YOUR INSTALLATION
Product Documents
Get belt specifications, sprocket data and installation drawings to check dimensions and plan your equipment.
Dimensions & materials
Dimensions, materials, working load and operating conditions.
Sprockets & drive fit
Tooth counts, bore sizes and sprocket dimensions for drive matching.
Drawings & installation
Product geometry, mounting dimensions and installation clearances.
Tell us the model and the documents you need for selection or installation.
Request Documents
