Dimensions & installation
Provide belt or chain width, loop length and available installation and return clearance.
Allow for running clearance; nominal width alone is not an installation check.XCY63 · Conveyor chains
63 mm Wide Plain Flexible Conveyor Chain
A 63 mm wide POM conveyor chain for food and beverage packs, with 25.4 mm pitch and articulated links for straight and curved routes.
Product Inquiry
10hours
Usual reply time
CHECK THE DETAILS
Specifications
Compare chain specifications and material performance to check conveyor fit, load and operating conditions.
| Specification | Units | Width | Pitch | Backflex Radius | Side-flex Radius | Pin Diameter | Weight (kg/m) |
|---|---|---|---|---|---|---|---|
| 63 | mm | 63 | 25.4 | 100 | 150 | 4 | 0.8 |
| in | 2.48 | 1 | 3.937 | 5.906 | 0.157 |
| Characteristic | Colour | Chain Material | Roller Material | Pin Material | Working load (N) | Conveyor Length (m) | Speed (m/min) | Service Temperature (°C) |
|---|---|---|---|---|---|---|---|---|
| White | POM | / | SUS | 2100 | ≤12 | -30–90 |
Working load is rated at 21 °C.
CHECK BEFORE ORDERING
Check dimensions. Match the parts.
Share belt or chain photos (both sides), sprocket and interface photos, key dimensions, conveyed product details, operating conditions and special requirements.
Check FitSprockets & matching parts
Share sprocket photos, tooth count, shaft bore dimensions and equipment interfaces.
Matching pitch alone does not establish sprocket compatibility.Product & operating conditions
Provide product size and weight, line speed, transfer gaps, temperature and cleaning conditions.
Confirm the configuration for the actual process before ordering.PRODUCT QUESTIONS
FAQ
More answers about product selection, installation and maintenance.
Can the plain surface retain packages on an incline?
The plain version has no flights or added friction layer. Inclined transport needs a configuration and product-contact assessment suited to the package and the required slope.
Are side-flex and backflex radii the same limit?
No. The 150 mm value applies to horizontal turning. The 100 mm backflex value applies to bending in the return path; both must be considered in the conveyor layout.
How do I check support for a pack wider than the chain?
Use the pack base dimensions and centre of gravity, then check its support through straight sections, curves and transfers. Product guides must suit the pack shape; a pack being wider than the chain does not by itself establish a suitable arrangement.
PLAN YOUR INSTALLATION
Product Documents
Get belt specifications, sprocket data and installation drawings to check dimensions and plan your equipment.
Dimensions & materials
Dimensions, materials, working load and operating conditions.
Sprockets & drive fit
Tooth counts, bore sizes and sprocket dimensions for drive matching.
Drawings & installation
Product geometry, mounting dimensions and installation clearances.
Tell us the model and the documents you need for selection or installation.
Request Documents
