Flat Top Packaging Conveyor Belt
XCY25409A- Pitch
- 25.4 mm
- Thickness
- 8.8 mm
- Pin Ø
- 5.0 mm
- Width Min.
- 76 mm
- Backflex Radius
- 40 mm
XCY25409Q · Modular belts
Ball Top Belt for Corrugated Sheet Handling
Embedded balls provide rolling contact for positioning corrugated sheets by hand or with a suitably designed transfer mechanism.
Product Inquiry
10hours
Usual reply time
Similar & related products
BUILT FOR YOUR PROCESS
Applications & Features
Review conveying applications, design features and operating conditions before choosing a belt or chain.
Reorient corrugated sheets between workstations
Corrugated sheet handling
A ball top belt supports corrugated sheets at the handling station.
Position and turn
Operators can position and turn sheets on the ball top surface before the next operation.
Line arrangement
An operator or separate transfer mechanism changes sheet position. Match belt support to sheet size and operating conditions.
Rolling contact beneath the sheet
Embedded balls provide rolling contact at the underside of the board. This contact lets the sheet move relative to the belt surface during manual handling; the operating force depends on the board, load and supporting conveyor.
Lateral positioning at the workstation
Operators can shift a sheet sideways to align it for the next handling step. Keep the receiving area and guides clear of the intended movement, and confirm that the sheet remains supported throughout the adjustment.
Distributed contact for sheet handling
Rows of embedded balls provide multiple contact points beneath the board. Select the belt width and conveyor support for the board dimensions so that the intended handling area remains supported.
Pricing & delivery
Share your required specifications, quantity, delivery location and target date, plus any special requirements. We aim to reply within 10 hours.
CHECK THE DETAILS
Specifications
Compare belt dimensions and material performance to check your conveyor fit, load and operating conditions.
| Units | Pitch | Thickness | Pin Ø | Width Min. | Backflex Radius | Width Increment | Open Area |
|---|---|---|---|---|---|---|---|
| mm | 25.4 | 12.7 | 5 | 76 | 30 | 76 | 0 % |
| in | 1 | 0.5 | 0.197 | 2.992 | 1.181 | 2.992 |
| Dimension | mm | in |
|---|---|---|
| Pitch | 25.4 | 1 |
| Thickness | 12.7 | 0.5 |
| Pin Ø | 5 | 0.197 |
| Width Min. | 76 | 2.992 |
| Backflex Radius | 30 | 1.181 |
| Width Increment | 76 | 2.992 |
| Open Area | 0 % | |
| Belt Material | Rod Material | Working Load | Belt Weight | Temperature Range |
|---|---|---|---|---|
| POM | Metal | 37000 N/m | 12.6 kg/m² | -40–85 °C |
| POM | PA | 34000 N/m | 7.2 kg/m² | -40–85 °C |
| POM | PBT | 34000 N/m | 7.5 kg/m² | -40–85 °C |
| PP | PP | 19000 N/m | 5.1 kg/m² | 0–100 °C |
Working-load values are specified per metre of belt width at 21 °C. They are not the permissible weight of an individual conveyed item; the applicable load depends on the operating temperature and conveyor configuration.
CHECK BEFORE ORDERING
Check dimensions. Match the parts.
Share belt or chain photos (both sides), sprocket and interface photos, key dimensions, conveyed product details, operating conditions and special requirements.
Check FitDimensions & installation
Provide belt or chain width, loop length and available installation and return clearance.
Allow for running clearance; nominal width alone is not an installation check.Sprockets & transfer equipment
Share sprocket photos, tooth count, shaft bore dimensions, and receiving-surface, pusher and stop layouts.
Confirm whether turning and side transfer are manual or externally driven; the belt does not provide that drive.Sheet support & operating conditions
Provide sheet size, thickness, stiffness, single or stacked load weight, speed, temperature and cleaning conditions.
Check sheet support and clearance for the intended turning or side-transfer movement.PRODUCT QUESTIONS
FAQ
More answers about product selection, installation and maintenance.
Does the belt turn horizontally?
This is a straight-running belt. The balls allow the conveyed sheet to move and change orientation relative to its surface; this does not make the belt itself a radius belt.
Does it rotate sheets automatically?
Manual turning uses the operator’s input. Automatic turning or transfer needs a separately designed mechanism and control arrangement; the belt alone does not determine the movement.
How is belt width selected?
The catalogue specifies a minimum nominal width of 76 mm and width increments of 76 mm. Confirm the module combination, actual width and drive arrangement for the conveyor.
How should load and materials be compared?
Compare the complete belt and rod material combination. Catalogue working-load values are given per metre of belt width at 21°C and are not the permissible weight of a single sheet or stack.
PLAN YOUR INSTALLATION
Product Documents
Get belt specifications, sprocket data and installation drawings to check dimensions and plan your equipment.
Dimensions & materials
Dimensions, materials, working load and operating conditions.
Sprockets & drive fit
Tooth counts, bore sizes and sprocket dimensions for drive matching.
Drawings & installation
Product geometry, mounting dimensions and installation clearances.
Tell us the model and the documents you need for selection or installation.
Request Documents
