Dimensions & installation
Provide belt or chain width, loop length and available installation and return clearance.
Allow for running clearance; nominal width alone is not an installation check.XCY254010B · Modular belts
Flush Grid Modular Belt for Produce Drainage
A straight-running flush grid belt with 35% open area for washing and inspection lines, shown without flights or sidewalls.
Product Inquiry
10hours
Usual reply time
CHECK THE DETAILS
Specifications
Compare belt dimensions and material performance to check your conveyor fit, load and operating conditions.
| Units | Pitch | Thickness | Pin Ø | Width Min. | Backflex Radius | Width Increment | Open Area |
|---|---|---|---|---|---|---|---|
| mm | 25.4 | 10 | 5 | 25 | 50 (standard) | 35 % | |
| in | 1 | 0.394 | 0.197 | 0.984 |
| Dimension | mm | in |
|---|---|---|
| Pitch | 25.4 | 1 |
| Thickness | 10 | 0.394 |
| Pin Ø | 5 | 0.197 |
| Width Min. | ||
| Backflex Radius | 25 | 0.984 |
| Width Increment | 50 (standard) | |
| Open Area | 35 % | |
| Belt Material | Rod Material | Working Load | Belt Weight | Temperature Range |
|---|---|---|---|---|
| POM | PP | 16000 N/m | 7.1 kg/m² | -40–85 °C |
| POM | PA | 21900 N/m | 7.2 kg/m² | -40–85 °C |
| PP | PP | 14000 N/m | 4.6 kg/m² | 5–105 °C |
| PE | PE | 8000 N/m | 5.1 kg/m² | -60–65 °C |
Load per unit belt width; check the permitted load at operating temperature. Working load at 21 °C.
CHECK BEFORE ORDERING
Check dimensions. Match the parts.
Share belt or chain photos (both sides), sprocket and interface photos, key dimensions, conveyed product details, operating conditions and special requirements.
Check FitSprockets & matching parts
Share sprocket photos, tooth count, shaft bore dimensions and equipment interfaces.
Matching pitch alone does not establish sprocket compatibility.Product & operating conditions
Provide product size and weight, line speed, transfer gaps, temperature and cleaning conditions.
Confirm the configuration for the actual process before ordering.PLAN YOUR INSTALLATION
Product Documents
Get belt specifications, sprocket data and installation drawings to check dimensions and plan your equipment.
Dimensions & materials
Dimensions, materials, working load and operating conditions.
Sprockets & drive fit
Tooth counts, bore sizes and sprocket dimensions for drive matching.
Drawings & installation
Product geometry, mounting dimensions and installation clearances.
Tell us the model and the documents you need for selection or installation.
Request Documents
