Flat Top Belt for Glass and PET Bottles
XCY25401A- Pitch
- 25.4 mm
- Thickness
- 8.7 mm
- Pin Ø
- 4.5 mm
- Width Min.
- 85 mm
- Backflex Radius
- 25 mm
XCY25401B · Modular belts
40% Open Grid Modular Conveyor Belt
A 25.4 mm pitch belt with an open carrying surface for drainage. POM, PP and PE options cover different load and temperature conditions.
Product Inquiry
10hours
Usual reply time
Similar & related products
CHECK THE DETAILS
Specifications
Compare belt dimensions and material performance to check your conveyor fit, load and operating conditions.
| Units | Pitch | Thickness | Pin Ø | Width Min. | Backflex Radius | Width Increment | Open Area |
|---|---|---|---|---|---|---|---|
| mm | 25.4 | 8.7 | 4.5 | 85 | 25 | 85 | 40 % |
| in | 1 | 0.343 | 0.177 | 3.346 | 0.984 | 3.346 |
| Dimension | mm | in |
|---|---|---|
| Pitch | 25.4 | 1 |
| Thickness | 8.7 | 0.343 |
| Pin Ø | 4.5 | 0.177 |
| Width Min. | 85 | 3.346 |
| Backflex Radius | 25 | 0.984 |
| Width Increment | 85 | 3.346 |
| Open Area | 40 % | |
| Belt Material | Rod Material | Working Load | Belt Weight | Temperature Range |
|---|---|---|---|---|
| POM | PP | 22000 N/m at 21 °C | 5.45 kg/m² | -40–85 °C |
| POM | PA | 23000 N/m at 21 °C | 5.55 kg/m² | -40–85 °C |
| PP | PP | 11000 N/m at 21 °C | 3.5 kg/m² | 5–105 °C |
| PE | PE | 5000 N/m at 21 °C | 3.7 kg/m² | -60–65 °C |
Nominal belt width W (mm): standard W = 85 × N; non-standard W = 85 × N + 10 × n. N counts 85 mm width units; n counts additional 10 mm increments. Both are whole-number counts.
CHECK BEFORE ORDERING
Check dimensions. Match the parts.
Share belt or chain photos (both sides), sprocket and interface photos, key dimensions, conveyed product details, operating conditions and special requirements.
Check FitDimensions & installation
Provide belt or chain width, loop length and available installation and return clearance.
Allow for running clearance; nominal width alone is not an installation check.Sprockets & matching parts
Share sprocket photos, tooth count, shaft bore dimensions and equipment interfaces.
Matching pitch alone does not establish sprocket compatibility.Product & operating conditions
Provide product size and weight, line speed, transfer gaps, temperature and cleaning conditions.
Confirm the configuration for the actual process before ordering.PRODUCT QUESTIONS
FAQ
More answers about product selection, installation and maintenance.
Is this the same surface as a flat top belt?
No. The carrying surface has through-openings for drainage. Product bases must span those openings; flat top belts provide a more continuous contact surface.
Can the double-guide version use the same layout?
The double-guide configuration adds features below the belt. It needs its own underside clearance and guide arrangement; select that configuration explicitly.
Can the quoted working load be used at every temperature?
The listed working loads are rated at 21 °C. The operating temperature range alone does not establish the allowable load at another temperature.
PLAN YOUR INSTALLATION
Product Documents
Get belt specifications, sprocket data and installation drawings to check dimensions and plan your equipment.
Dimensions & materials
Dimensions, materials, working load and operating conditions.
Sprockets & drive fit
Tooth counts, bore sizes and sprocket dimensions for drive matching.
Drawings & installation
Product geometry, mounting dimensions and installation clearances.
Tell us the model and the documents you need for selection or installation.
Request Documents
