Flat Top Belt for Glass Containers
XCY27200A- Pitch
- 27.2 mm
- Thickness
- 8.8 mm
- Pin Ø
- 4.6 mm
- Width Min.
- 50.8 mm
- Backflex Radius
- 35 mm
XCY25401A · Modular belts
Flat Top Belt for Glass and PET Bottles
A continuous closed surface supports glass and PET containers on beverage lines. The flat carrying face also suits food and packaging conveying.
Product Inquiry
10hours
Usual reply time
Similar & related products
BUILT FOR YOUR PROCESS
Applications & Features
Review conveying applications, design features and operating conditions before choosing a belt or chain.
Continuous flat support
The closed flat top provides continuous support beneath soft tissue packs and cartons during post-packaging conveying.
Transverse rod connections
Transverse rods connect the modular rows. Belt and rod materials can be selected to suit the operating conditions.
Local section maintenance
Rod-connected modules allow an affected section to be replaced while retaining serviceable belt sections. Carry out maintenance with the conveyor stopped and isolated.
Pricing & delivery
Share your required specifications, quantity, delivery location and target date, plus any special requirements. We aim to reply within 10 hours.
CHECK THE DETAILS
Specifications
Compare belt dimensions and material performance to check your conveyor fit, load and operating conditions.
| Units | Pitch | Thickness | Pin Ø | Width Min. | Backflex Radius | Width Increment | Open Area |
|---|---|---|---|---|---|---|---|
| mm | 25.4 | 8.7 | 4.5 | 85 | 25 | 85 | 0 % |
| in | 1 | 0.343 | 0.177 | 3.346 | 0.984 | 3.346 |
| Dimension | mm | in |
|---|---|---|
| Pitch | 25.4 | 1 |
| Thickness | 8.7 | 0.343 |
| Pin Ø | 4.5 | 0.177 |
| Width Min. | 85 | 3.346 |
| Backflex Radius | 25 | 0.984 |
| Width Increment | 85 | 3.346 |
| Open Area | 0 % | |
| Belt Material | Rod Material | Working Load | Belt Weight | Temperature Range |
|---|---|---|---|---|
| POM | PP | 22000 N/m at 21 °C | 6.50 kg/m² | -40–85 °C |
| POM | PA | 23000 N/m at 21 °C | 6.60 kg/m² | -40–85 °C |
| PP | PP | 11000 N/m at 21 °C | 4.30 kg/m² | 5–105 °C |
| PE | PE | 5000 N/m at 21 °C | 4.60 kg/m² | -60–65 °C |
The width increment shown applies to standard assemblies.
CHECK BEFORE ORDERING
Check dimensions. Match the parts.
Share belt or chain photos (both sides), sprocket and interface photos, key dimensions, conveyed product details, operating conditions and special requirements.
Check FitDimensions & installation
Provide belt or chain width, loop length and available installation and return clearance.
Allow for running clearance; nominal width alone is not an installation check.Sprockets & matching parts
Share sprocket photos, tooth count, shaft bore dimensions and equipment interfaces.
Matching pitch alone does not establish sprocket compatibility.Product & operating conditions
Provide product size and weight, line speed, transfer gaps, temperature and cleaning conditions.
Confirm the configuration for the actual process before ordering.PRODUCT QUESTIONS
FAQ
More answers about product selection, installation and maintenance.
Does a closed surface remove the need for bottle guides?
No. The flat surface supports the base, while guides and transfers control the container path. Check glass or PET bottle stability with the actual base shape and line speed.
Can the belt carry soft wrapped packs as well as rigid containers?
The closed carrying face provides continuous support. For a soft pack, also check how the wrapper and base cross joints and transfers, and set the guides for the pack shape.
Is the permitted load identical for all POM configurations?
Use the complete belt and rod row. POM belts with different rod materials have different listed loads; the operating temperature and actual conveyor duty must also be considered.
Does local module replacement correct all belt wear?
It can address an affected section, but adjacent modules, rods, sprockets and support surfaces should also be inspected. Stop and isolate the conveyor before replacing parts.
PLAN YOUR INSTALLATION
Product Documents
Get belt specifications, sprocket data and installation drawings to check dimensions and plan your equipment.
Dimensions & materials
Dimensions, materials, working load and operating conditions.
Sprockets & drive fit
Tooth counts, bore sizes and sprocket dimensions for drive matching.
Drawings & installation
Product geometry, mounting dimensions and installation clearances.
Tell us the model and the documents you need for selection or installation.
Request Documents
