Flat Top Belt for Glass and PET Bottles
XCY25401A- Pitch
- 25.4 mm
- Thickness
- 8.7 mm
- Pin Ø
- 4.5 mm
- Width Min.
- 85 mm
- Backflex Radius
- 25 mm
XCY27200A · Modular belts
Flat Top Belt for Glass Containers
A flat top belt for straight conveying of glass containers. Match belt width, guides and transfers to the container base.
Product Inquiry
10hours
Usual reply time
Similar & related products
BUILT FOR YOUR PROCESS
Applications & Features
Review conveying applications, design features and operating conditions before choosing a belt or chain.
Glass container inspection
Support container bases
The closed carrying face gives glass jars an even surface beneath their bases.
Keep inspection organized
A straight working section presents the containers for visual checking along the line.
Guide the working lane
Independent guides define the lane around the actual container dimensions and workstation layout.
An even carrying face
The closed flat top supports product bases across the carrying surface, without the large openings of a grid belt.
Connected modular rows
Transverse connections join the belt rows into a continuous carrying surface. Match the belt and rod materials to the operating conditions.
Replace the affected section
Rod-connected belt sections allow local replacement of worn or damaged modules while serviceable sections remain in use.
Pricing & delivery
Share your required specifications, quantity, delivery location and target date, plus any special requirements. We aim to reply within 10 hours.
CHECK THE DETAILS
Specifications
Compare belt dimensions and material performance to check your conveyor fit, load and operating conditions.
| Units | Pitch | Thickness | Pin Ø | Width Min. | Backflex Radius | Width Increment | Open Area |
|---|---|---|---|---|---|---|---|
| mm | 27.2 | 8.8 | 4.6 | 50.8 | 35 | 152.4 | 0 % |
| in | 1.071 | 0.346 | 0.181 | 2 | 1.378 | 6 |
| Dimension | mm | in |
|---|---|---|
| Pitch | 27.2 | 1.071 |
| Thickness | 8.8 | 0.346 |
| Pin Ø | 4.6 | 0.181 |
| Width Min. | 50.8 | 2 |
| Backflex Radius | 35 | 1.378 |
| Width Increment | 152.4 | 6 |
| Open Area | 0 % | |
| Belt Material | Rod Material | Working Load | Belt Weight | Temperature Range |
|---|---|---|---|---|
| POM | PA | 22000 N/m at 21 °C | 5.7 kg/m² | -40–85 °C |
| POM | PP | 19800 N/m at 21 °C | 5.6 kg/m² | -40–85 °C |
| PP | PP | 12000 N/m at 21 °C | 3.7 kg/m² | 5–105 °C |
| PE | PE | 7500 N/m at 21 °C | 4.0 kg/m² | -60–65 °C |
Standard nominal widths use 152.4 mm multiples. Non-standard widths can include additional 8.47 mm increments.
CHECK BEFORE ORDERING
Check dimensions. Match the parts.
Share belt or chain photos (both sides), sprocket and interface photos, key dimensions, conveyed product details, operating conditions and special requirements.
Check FitDimensions & installation
Provide belt or chain width, loop length and available installation and return clearance.
Allow for running clearance; nominal width alone is not an installation check.Sprockets & matching parts
Share sprocket photos, tooth count, shaft bore dimensions and equipment interfaces.
Matching pitch alone does not establish sprocket compatibility.Product & operating conditions
Provide product size and weight, line speed, transfer gaps, temperature and cleaning conditions.
Confirm the configuration for the actual process before ordering.PRODUCT QUESTIONS
FAQ
More answers about product selection, installation and maintenance.
Will a flat top belt keep glass containers stable through a transfer?
Stability also depends on the container base, transfer gap, height difference, guides and line speed. Check the complete transfer with the smallest or least stable container being handled.
Does the minimum belt width define every available assembly width?
No. Minimum width and the standard width-building system describe different things. Select the finished width using the documented assembly rules, then check the module arrangement and running clearance.
Can the same POM belt body use either rod rating?
Use the rating for the selected rod material. The POM/PA and POM/PP combinations have different listed loads and weights; one row must not be substituted for the other.
Can a worn belt section be replaced while retaining the rest?
Rod-connected construction allows local section replacement. Inspect the adjacent modules, rods, sprockets and support surfaces as well, and stop and isolate the conveyor before maintenance.
PLAN YOUR INSTALLATION
Product Documents
Get belt specifications, sprocket data and installation drawings to check dimensions and plan your equipment.
Dimensions & materials
Dimensions, materials, working load and operating conditions.
Sprockets & drive fit
Tooth counts, bore sizes and sprocket dimensions for drive matching.
Drawings & installation
Product geometry, mounting dimensions and installation clearances.
Tell us the model and the documents you need for selection or installation.
Request Documents
