Flush Grid Modular Belt for Produce Drainage
XCY254010B- Pitch
- 25.4 mm
- Thickness
- 10 mm
- Pin Ø
- 5 mm
- Backflex Radius
- 25 mm
XCY50801B · Modular belts
Flush Grid Belt for Produce Drainage
A 50.8 mm-pitch flush grid belt with elongated openings for fresh produce transfer and drainage after washing.
Product Inquiry
10hours
Usual reply time
Similar & related products
BUILT FOR YOUR PROCESS
Applications & Features
Review conveying applications, design features and operating conditions before choosing a belt or chain.
Fresh cucumber inspection after washing
Let residual water pass through
The paired elongated openings provide paths through the carrying face after produce washing.
Support whole produce
The solid bridges around the slots support whole products during straight conveying.
Keep inspection accessible
A straight working section gives operators access to check and sort the produce.
Open paths for drainage
Openings through the carrying face let residual water pass below the belt during conveying.
Support across the grid
Solid ribs and bridges carry whole products around the openings. Product size determines the required support and guide arrangement.
Interlocking modular construction
Interlocking hinge loops and transverse rods connect the modules into a continuous conveying surface.
Pricing & delivery
Share your required specifications, quantity, delivery location and target date, plus any special requirements. We aim to reply within 10 hours.
CHECK THE DETAILS
Specifications
Compare belt dimensions and material performance to check your conveyor fit, load and operating conditions.
| Units | Pitch | Thickness | Pin Ø | Width Min. | Backflex Radius | Width Increment | Open Area |
|---|---|---|---|---|---|---|---|
| mm | 50.8 | 16 | 6 | 152 | 75 | 50.49 | 18 % |
| in | 2 | 0.63 | 0.236 | 5.984 | 2.953 | 1.988 |
| Dimension | mm | in |
|---|---|---|
| Pitch | 50.8 | 2 |
| Thickness | 16 | 0.63 |
| Pin Ø | 6 | 0.236 |
| Width Min. | 152 | 5.984 |
| Backflex Radius | 75 | 2.953 |
| Width Increment | 50.49 | 1.988 |
| Open Area | 18 % | |
| Belt Material | Rod Material | Working Load | Belt Weight | Temperature Range |
|---|---|---|---|---|
| POM | PP | 20000 N/m at 21 °C | 11.8 kg/m² | 0–85 °C |
| POM | PA | 21000 N/m at 21 °C | 11.9 kg/m² | -5–85 °C |
| PP | PP | 15000 N/m at 21 °C | 7.9 kg/m² | 0–105 °C |
| PE | PE | 8000 N/m at 21 °C | 8.4 kg/m² | -45–65 °C |
The width increment shown applies to standard assemblies.
CHECK BEFORE ORDERING
Check dimensions. Match the parts.
Share belt or chain photos (both sides), sprocket and interface photos, key dimensions, conveyed product details, operating conditions and special requirements.
Check FitDimensions & installation
Provide belt or chain width, loop length and available installation and return clearance.
Allow for running clearance; nominal width alone is not an installation check.Sprockets & matching parts
Share sprocket photos, tooth count, shaft bore dimensions and equipment interfaces.
Matching pitch alone does not establish sprocket compatibility.Product & operating conditions
Provide product size and weight, line speed, transfer gaps, temperature and cleaning conditions.
Confirm the configuration for the actual process before ordering.PRODUCT QUESTIONS
FAQ
More answers about product selection, installation and maintenance.
Can the belt carry small cut produce as well as whole vegetables?
Check the smallest pieces against the elongated openings, row joints and transfer gaps. Whole produce can bridge the openings differently from cut pieces, so product-contact support must be reviewed for the actual mix.
Will drainage through the belt leave produce dry for packing?
The openings allow free water to pass through. Remaining surface water depends on product shape, contact area, airflow and conveying time; a separate drying stage may be needed.
Can an open grid be cleaned without access to the return side?
Provide access to joints, hinge connections, the underside and conveyor supports. Through-openings help water pass, but do not establish that every contact surface has been cleaned.
Are POM belts with PP and PA rods equivalent for ordering?
Specify the rod material with the belt body. Those combinations have different listed loads and weights, so the complete material row must match the ordered configuration.
PLAN YOUR INSTALLATION
Product Documents
Get belt specifications, sprocket data and installation drawings to check dimensions and plan your equipment.
Dimensions & materials
Dimensions, materials, working load and operating conditions.
Sprockets & drive fit
Tooth counts, bore sizes and sprocket dimensions for drive matching.
Drawings & installation
Product geometry, mounting dimensions and installation clearances.
Tell us the model and the documents you need for selection or installation.
Request Documents
