Flush Grid Modular Conveyor Belt
XCY50803B- Pitch
- 50.8 mm
- Thickness
- 16 mm
- Pin Ø
- 7.0 mm
- Backflex Radius
- 45 mm
XCY50803B1 · Modular belts
50.8 mm Flush Grid Modular Conveyor Belt
A 34% open belt for rubber-component conveying. The flush grid supports the product while leaving passages for air and liquid through the belt.
Product Inquiry
10hours
Usual reply time
Similar & related products
CHECK THE DETAILS
Specifications
Compare belt dimensions and material performance to check your conveyor fit, load and operating conditions.
| Units | Pitch | Thickness | Pin Ø | Width Min. | Backflex Radius | Width Increment | Open Area |
|---|---|---|---|---|---|---|---|
| mm | 50.8 | 16 | 7 | 146.75 | 45 | 75 | 34 % |
| in | 2 | 0.63 | 0.276 | 5.778 | 1.772 | 2.953 |
| Dimension | mm | in |
|---|---|---|
| Pitch | 50.8 | 2 |
| Thickness | 16 | 0.63 |
| Pin Ø | 7 | 0.276 |
| Width Min. | 146.75 | 5.778 |
| Backflex Radius | 45 | 1.772 |
| Width Increment | 75 | 2.953 |
| Open Area | 34 % | |
| Belt Material | Rod Material | Working Load | Belt Weight | Temperature Range |
|---|---|---|---|---|
| POM | PA | 35000 N/m at 21 °C | 12 kg/m² | -40–85 °C |
| POM | PP | 30000 N/m at 21 °C | 12.1 kg/m² | 5–93 °C |
| PP | PP | 26000 N/m at 21 °C | 8 kg/m² | 5–105 °C |
| PE | PE | 18000 N/m at 21 °C | 8.3 kg/m² | -60–65 °C |
Standard width assemblies combine 146.75 mm and 75 mm modules. Example: 443.5 mm = 2 × 146.75 + 2 × 75 mm.
CHECK BEFORE ORDERING
Check dimensions. Match the parts.
Share belt or chain photos (both sides), sprocket and interface photos, key dimensions, conveyed product details, operating conditions and special requirements.
Check FitDimensions & installation
Provide belt or chain width, loop length and available installation and return clearance.
Allow for running clearance; nominal width alone is not an installation check.Sprockets & matching parts
Share sprocket photos, tooth count, shaft bore dimensions and equipment interfaces.
Matching pitch alone does not establish sprocket compatibility.Product & operating conditions
Provide product size and weight, line speed, transfer gaps, temperature and cleaning conditions.
Confirm the configuration for the actual process before ordering.PRODUCT QUESTIONS
FAQ
More answers about product selection, installation and maintenance.
Can this belt be specified from another belt’s pitch alone?
No. The 50.8 mm pitch does not establish a match for the drive pockets, sprockets, rods or edge arrangement. Compare those interfaces when planning a replacement.
Is the temperature limit the same for every material combination?
No. Use the range shown for the complete belt and rod combination. A temperature stated for one row must not be applied to another material row.
What else affects cooling through an open belt?
The support bed, available airflow, component contact area and process dwell time all affect the result. Keep the air path open through both the belt and the conveyor support.
PLAN YOUR INSTALLATION
Product Documents
Get belt specifications, sprocket data and installation drawings to check dimensions and plan your equipment.
Dimensions & materials
Dimensions, materials, working load and operating conditions.
Sprockets & drive fit
Tooth counts, bore sizes and sprocket dimensions for drive matching.
Drawings & installation
Product geometry, mounting dimensions and installation clearances.
Tell us the model and the documents you need for selection or installation.
Request Documents
