Flush Grid Modular Belt for Produce Drainage
XCY254010B- Pitch
- 25.4 mm
- Thickness
- 10 mm
- Pin Ø
- 5 mm
- Backflex Radius
- 25 mm
XCY50803B · Modular belts
Flush Grid Modular Conveyor Belt
A flush grid modular belt with 34% open area for conveying whole produce after washing. Match the openings to the product size.
Product Inquiry
10hours
Usual reply time
Similar & related products
BUILT FOR YOUR PROCESS
Applications & Features
Review conveying applications, design features and operating conditions before choosing a belt or chain.
Flush grid for drainage
The 34% open-area surface provides passages for residual water while the connected plastic webs support the conveyed product. Use suitable support and water collection beneath the belt, and match the openings to the product size.
Rows joined by transverse rods
Adjacent rows connect with 7.0 mm transverse rods, allowing the belt to hinge vertically. Confirm the rod material and assembly for the selected configuration.
Modular width combinations
Modules are 146.5 mm and 73.25 mm wide. Standard nominal widths start at 146.5 mm and increase in 73.25 mm steps. Confirm finished width and clearance.
Pricing & delivery
Share your required specifications, quantity, delivery location and target date, plus any special requirements. We aim to reply within 10 hours.
CHECK THE DETAILS
Specifications
Compare belt dimensions and material performance to check your conveyor fit, load and operating conditions.
| Units | Pitch | Thickness | Pin Ø | Width Min. | Backflex Radius | Width Increment | Open Area |
|---|---|---|---|---|---|---|---|
| mm | 50.8 | 16 | 7.0 | 45 | 73.25 | 34 % | |
| in | 2 | 0.63 | 0.276 | 1.772 | 2.884 |
| Dimension | mm | in |
|---|---|---|
| Pitch | 50.8 | 2 |
| Thickness | 16 | 0.63 |
| Pin Ø | 7.0 | 0.276 |
| Width Min. | ||
| Backflex Radius | 45 | 1.772 |
| Width Increment | 73.25 | 2.884 |
| Open Area | 34 % | |
| Belt Material | Rod Material | Working Load | Belt Weight | Temperature Range |
|---|---|---|---|---|
| POM | PP | 36000 N/m at 21 °C | 12.0 kg/m² | 5–93 °C |
| POM | PA | 55000 N/m at 21 °C | 12.1 kg/m² | -40–85 °C |
| PP | PP | 36000 N/m at 21 °C | 8.0 kg/m² | 5–105 °C |
| PE | PE | 24000 N/m at 21 °C | 8.3 kg/m² | -60–65 °C |
Single module width: 146.5 / 73.25 mm. Standard nominal width: 146.5 + 73.25 × N mm. Non-standard nominal width: 152.4 × N + 19.05 × n mm.
CHECK BEFORE ORDERING
Check dimensions. Match the parts.
Share belt or chain photos (both sides), sprocket and interface photos, key dimensions, conveyed product details, operating conditions and special requirements.
Check FitDimensions & installation
Provide belt or chain width, loop length and available installation and return clearance.
Allow for running clearance; nominal width alone is not an installation check.Sprockets & matching parts
Share sprocket photos, tooth count, shaft bore dimensions and equipment interfaces.
Matching pitch alone does not establish sprocket compatibility.Product & operating conditions
Provide product size and weight, line speed, transfer gaps, temperature and cleaning conditions.
Confirm the configuration for the actual process before ordering.PRODUCT QUESTIONS
FAQ
More answers about product selection, installation and maintenance.
Can this belt drain whole fruit and vegetables after washing?
The 34% open-grid surface allows wash water to pass through while the plastic webs carry the produce. Check the size and shape of the smallest items against the openings, and confirm the cleaning conditions and support arrangement for the line.
How is the belt width specified?
Standard nominal widths follow 146.5 + 73.25 × N mm, starting at 146.5 mm. The documented module widths are 146.5 mm and 73.25 mm. Non-standard nominal widths use 152.4 × N + 19.05 × n mm, with N and n as whole-number increments. Provide the required finished width and conveyor clearance so the module arrangement and actual width can be confirmed before ordering.
Can I reuse sprockets from another 50.8 mm-pitch belt?
Pitch alone does not establish compatibility. This belt has matching sprocket options with 6, 8, 10, 12 or 16 teeth. Check the belt underside, tooth profile, shaft bore and return clearance together before reusing drive components.
PLAN YOUR INSTALLATION
Product Documents
Get belt specifications, sprocket data and installation drawings to check dimensions and plan your equipment.
Dimensions & materials
Dimensions, materials, working load and operating conditions.
Sprockets & drive fit
Tooth counts, bore sizes and sprocket dimensions for drive matching.
Drawings & installation
Product geometry, mounting dimensions and installation clearances.
Tell us the model and the documents you need for selection or installation.
Request Documents
