Flush Grid Modular Belt for Produce Drainage
XCY254010B- Pitch
- 25.4 mm
- Thickness
- 10 mm
- Pin Ø
- 5 mm
- Backflex Radius
- 25 mm
XCY25405B · Modular belts
Fixed Width Flush Grid Belt for Produce
A fixed-width flush grid belt that supports fruit and vegetables while allowing water to drain through the carrying surface.
Product Inquiry
10hours
Usual reply time
Similar & related products
BUILT FOR YOUR PROCESS
Applications & Features
Review conveying applications, design features and operating conditions before choosing a belt or chain.
Open grid for wash-through cleaning
During scheduled cleaning, rinse water can pass through the open grid to the collection tray below. Use cleaning methods and chemicals suitable for the selected belt and rod materials.
Articulated rows with backflex capability
Hinged rows allow the belt to bend in the vertical plane. The specified minimum backflex radius is 10 mm; drive and return components must be selected for the conveyor configuration.
Open passages for through-belt airflow
Grid openings allow air from external fans to pass through the carrying surface. Keep the air path below the belt clear and select the airflow to suit the product and process.
Pricing & delivery
Share your required specifications, quantity, delivery location and target date, plus any special requirements. We aim to reply within 10 hours.
CHECK THE DETAILS
Specifications
Compare belt dimensions and material performance to check your conveyor fit, load and operating conditions.
| Units | Pitch | Thickness | Pin Ø | Width Min. | Backflex Radius | Width Increment | Open Area |
|---|---|---|---|---|---|---|---|
| mm | 25.4 | 8.8 | 5 | 186.7 | 10 | Fixed width | |
| in | 1 | 0.346 | 0.197 | 7.35 | 0.394 |
| Dimension | mm | in |
|---|---|---|
| Pitch | 25.4 | 1 |
| Thickness | 8.8 | 0.346 |
| Pin Ø | 5 | 0.197 |
| Width Min. | 186.7 | 7.35 |
| Backflex Radius | 10 | 0.394 |
| Width Increment | Fixed width | |
| Open Area | ||
| Belt Material | Rod Material | Working Load | Belt Weight | Temperature Range |
|---|---|---|---|---|
| POM | PP | 5000 N/m at 21 °C | 1.33 kg/m² | 0–85 °C |
| POM | PA | 5200 N/m at 21 °C | 1.35 kg/m² | -5–85 °C |
| PP | PP | 2700 N/m at 21 °C | 0.85 kg/m² | 0–105 °C |
| PE | PE | 1900 N/m at 21 °C | 0.90 kg/m² | -45–65 °C |
Actual belt width: 0.1–0.3% below the nominal 186.7 mm width due to material shrinkage.
CHECK BEFORE ORDERING
Check dimensions. Match the parts.
Share belt or chain photos (both sides), sprocket and interface photos, key dimensions, conveyed product details, operating conditions and special requirements.
Check FitDimensions & installation
Provide belt or chain width, loop length and available installation and return clearance.
Allow for running clearance; nominal width alone is not an installation check.Sprockets & matching parts
Share sprocket photos, tooth count, shaft bore dimensions and equipment interfaces.
Matching pitch alone does not establish sprocket compatibility.Product & operating conditions
Provide product size and weight, line speed, transfer gaps, temperature and cleaning conditions.
Confirm the configuration for the actual process before ordering.PRODUCT QUESTIONS
FAQ
More answers about product selection, installation and maintenance.
Can this fixed-width belt be assembled to any required width?
Treat the listed width as a fixed configuration. Check the actual supplied width and conveyor clearance; a modular construction does not mean this version offers arbitrary width combinations.
Does the small backflex radius define the product transfer gap?
No. Backflex describes reverse bending of the belt. Product transfer also depends on the conveyor end, receiving surface and product base, so the gap must be checked in that arrangement.
Can the grid support small pieces of fruit?
Compare the pieces with the actual openings, joints and transfer gaps. The open surface needs enough product-contact area; it should not be selected from the drainage requirement alone.
Can wash water passing through the grid be used as proof of cleanability?
Water passage does not establish that all belt and conveyor surfaces are clean. Provide access to joints, the underside and supports, and use a cleaning method suited to the selected belt and rod materials.
PLAN YOUR INSTALLATION
Product Documents
Get belt specifications, sprocket data and installation drawings to check dimensions and plan your equipment.
Dimensions & materials
Dimensions, materials, working load and operating conditions.
Sprockets & drive fit
Tooth counts, bore sizes and sprocket dimensions for drive matching.
Drawings & installation
Product geometry, mounting dimensions and installation clearances.
Tell us the model and the documents you need for selection or installation.
Request Documents
