Flush Grid Belt for Empty Can Conveying
XCY27200B1- Pitch
- 27.2 mm
- Thickness
- 8.8 mm
- Pin Ø
- 4.6 mm
- Backflex Radius
- 35 mm
XCY19050B · Modular belts
Flush Grid Belt for Can Conveying
A flush grid belt with elongated openings for drainage and airflow during can conveying and processing.
Product Inquiry
10hours
Usual reply time
Similar & related products
CHECK THE DETAILS
Specifications
Compare belt dimensions and material performance to check your conveyor fit, load and operating conditions.
| Units | Pitch | Thickness | Pin Ø | Width Min. | Backflex Radius | Width Increment | Open Area |
|---|---|---|---|---|---|---|---|
| mm | 19.05 | 8.7 | 5 | 25 | 76 | 16 % | |
| in | 0.75 | 0.343 | 0.197 | 0.984 | 2.992 |
| Dimension | mm | in |
|---|---|---|
| Pitch | 19.05 | 0.75 |
| Thickness | 8.7 | 0.343 |
| Pin Ø | 5 | 0.197 |
| Width Min. | ||
| Backflex Radius | 25 | 0.984 |
| Width Increment | 76 | 2.992 |
| Open Area | 16 % | |
| Belt Material | Rod Material | Working Load | Belt Weight | Temperature Range |
|---|---|---|---|---|
| POM | PP | 13000 N/m at 21 °C | 5.90 kg/m² | 0–85 °C |
| POM | PA | 14000 N/m at 21 °C | 6.00 kg/m² | -5–85 °C |
| PP | PP | 7000 N/m at 21 °C | 4.50 kg/m² | 0–105 °C |
The width increment shown applies to standard assemblies.
CHECK BEFORE ORDERING
Check dimensions. Match the parts.
Share belt or chain photos (both sides), sprocket and interface photos, key dimensions, conveyed product details, operating conditions and special requirements.
Check FitDimensions & installation
Provide belt or chain width, loop length and available installation and return clearance.
Allow for running clearance; nominal width alone is not an installation check.Sprockets & matching parts
Share sprocket photos, tooth count, shaft bore dimensions and equipment interfaces.
Matching pitch alone does not establish sprocket compatibility.Product & operating conditions
Provide product size and weight, line speed, transfer gaps, temperature and cleaning conditions.
Confirm the configuration for the actual process before ordering.PRODUCT QUESTIONS
FAQ
More answers about product selection, installation and maintenance.
Can the grid drain a pack that covers the openings?
Drainage depends on where water can reach the openings and on the space below the belt. A broad or flexible pack base can cover part of the grid, so check the actual contact pattern and water path.
Can the belt cool products without ventilation equipment?
The openings provide an air path. Airflow and the resulting cooling depend on the external equipment, product contact area and time on the conveyor.
How should small container bases be assessed on the grid?
Compare the smallest base with the openings, row joints and transfer gaps. Select the support, guides and receiving arrangement so the product remains stable throughout the route.
PLAN YOUR INSTALLATION
Product Documents
Get belt specifications, sprocket data and installation drawings to check dimensions and plan your equipment.
Dimensions & materials
Dimensions, materials, working load and operating conditions.
Sprockets & drive fit
Tooth counts, bore sizes and sprocket dimensions for drive matching.
Drawings & installation
Product geometry, mounting dimensions and installation clearances.
Tell us the model and the documents you need for selection or installation.
Request Documents
