Flat Top Belt for Glass Containers
XCY27200A- Pitch
- 27.2 mm
- Thickness
- 8.8 mm
- Pin Ø
- 4.6 mm
- Width Min.
- 50.8 mm
- Backflex Radius
- 35 mm
XCY27200B1 · Modular belts
Flush Grid Belt for Empty Can Conveying
A 27.2 mm-pitch flush grid belt with 38% open area for straight-running empty-can handling.
Product Inquiry
10hours
Usual reply time
Similar & related products
BUILT FOR YOUR PROCESS
Applications & Features
Review conveying applications, design features and operating conditions before choosing a belt or chain.
Empty-can conveying between process stations
Empty can conveying
A flush grid modular belt moves empty cans between conveyor stations.
Container support
The flat grid surface supports cans during straight conveying.
Guided transfers
Match guides and transfer equipment to the cans and line where lateral movement is required.
Flat surface for container handling
The flush conveying surface supports can bases without raised ribs or friction inserts. For lateral transfers, match the guide arrangement and receiving surface to the container geometry and line speed.
38% open-grid construction
Openings through the belt provide passages for air and liquid. Confirm product support, cleaning conditions and the collection or airflow arrangement for the intended process.
Widths matched to the conveyor
Standard nominal widths are based on 152.4 mm multiples; non-standard combinations can include 8.47 mm increments. Match the assembled width and edge configuration to the conveyor and container layout before ordering.
Pricing & delivery
Share your required specifications, quantity, delivery location and target date, plus any special requirements. We aim to reply within 10 hours.
CHECK THE DETAILS
Specifications
Compare belt dimensions and material performance to check your conveyor fit, load and operating conditions.
| Units | Pitch | Thickness | Pin Ø | Width Min. | Backflex Radius | Width Increment | Open Area |
|---|---|---|---|---|---|---|---|
| mm | 27.2 | 8.8 | 4.6 | 35 | 152.4 | 38 % | |
| in | 1.071 | 0.346 | 0.181 | 1.378 | 6 |
| Dimension | mm | in |
|---|---|---|
| Pitch | 27.2 | 1.071 |
| Thickness | 8.8 | 0.346 |
| Pin Ø | 4.6 | 0.181 |
| Width Min. | ||
| Backflex Radius | 35 | 1.378 |
| Width Increment | 152.4 | 6 |
| Open Area | 38 % | |
| Belt Material | Rod Material | Working Load | Belt Weight | Temperature Range |
|---|---|---|---|---|
| POM | PA | 22000 N/m at 21 °C | 5.7 kg/m² | -40–85 °C |
| POM | PP | 19800 N/m at 21 °C | 5.6 kg/m² | -40–85 °C |
| PP | PP | 12000 N/m at 21 °C | 3.7 kg/m² | 5–105 °C |
| PE | PE | 7500 N/m at 21 °C | 4.0 kg/m² | -60–65 °C |
Working loads are specified per metre of belt width. Assess temperature limits and permitted load together for the selected belt and rod combination.
CHECK BEFORE ORDERING
Check dimensions. Match the parts.
Share belt or chain photos (both sides), sprocket and interface photos, key dimensions, conveyed product details, operating conditions and special requirements.
Check FitDimensions & installation
Provide belt or chain width, loop length and available installation and return clearance.
Allow for running clearance; nominal width alone is not an installation check.Sprockets & matching parts
Share sprocket photos, tooth count, shaft bore dimensions and equipment interfaces.
Matching pitch alone does not establish sprocket compatibility.Product & operating conditions
Provide product size and weight, line speed, transfer gaps, temperature and cleaning conditions.
Confirm the configuration for the actual process before ordering.PRODUCT QUESTIONS
FAQ
More answers about product selection, installation and maintenance.
Is this a flat top or flush grid belt?
It is a flush grid belt with a flat conveying surface and 38% open area. It has no raised ribs, rubber inserts, flights or sidewalls in the shown configuration.
Can the belt move cans sideways?
The flush surface supports guided lateral movement. The transfer layout, guides, receiving surface and operating speed must be selected for the can; the belt does not provide an automatic side-transfer mechanism by itself.
Does a temperature within the listed range allow the full quoted load?
The load figures are referenced at the stated test temperature. Being inside the operating range does not by itself establish the permitted load at another temperature. Select the complete belt and rod combination for the actual duty.
How should support for an empty can be checked?
Compare the can base with the grid openings, joints and transfer gaps. Include the guides and line speed, since an open belt surface and a small contact footprint must be assessed together.
PLAN YOUR INSTALLATION
Product Documents
Get belt specifications, sprocket data and installation drawings to check dimensions and plan your equipment.
Dimensions & materials
Dimensions, materials, working load and operating conditions.
Sprockets & drive fit
Tooth counts, bore sizes and sprocket dimensions for drive matching.
Drawings & installation
Product geometry, mounting dimensions and installation clearances.
Tell us the model and the documents you need for selection or installation.
Request Documents
