Flat Top Belt for Glass Containers
XCY27200A- Pitch
- 27.2 mm
- Thickness
- 8.8 mm
- Pin Ø
- 4.6 mm
- Width Min.
- 50.8 mm
- Backflex Radius
- 35 mm
XCY27200J · Modular belts
Friction Top Modular Belt for Tire Conveying
Textured TPU pads on a PP modular base provide a gripping contact surface for tires on straight conveyor sections.
Product Inquiry
10hours
Usual reply time
Similar & related products
BUILT FOR YOUR PROCESS
Applications & Features
Review conveying applications, design features and operating conditions before choosing a belt or chain.
Tire conveying with a friction contact surface
Tire inspection
A friction-surface modular belt carries tires along a straight inspection section.
Tire positioning
Match the carrying width and guides to the tire orientation and contact area.
Line conditions
Specify contact condition, belt speed and line geometry. Inclined sections require an application assessment.
Textured TPU product contact
Textured black TPU pads provide grip at the tire contact surface. Assess tire surface, moisture and operating speed when specifying the line.
Closed top for continuous support
The 0% open-area surface supports the tire contact area without through-openings in the carrying face. The textured top is a solid contact layer rather than a drainage grid. Choose this configuration where closed support is required.
Modular construction for width specification
Hinged modules form the belt. Standard width combinations use 152.4 mm increments; confirm module arrangement, finished width, drive engagement and return clearance.
Pricing & delivery
Share your required specifications, quantity, delivery location and target date, plus any special requirements. We aim to reply within 10 hours.
CHECK THE DETAILS
Specifications
Compare belt dimensions and material performance to check your conveyor fit, load and operating conditions.
| Units | Pitch | Thickness | Pin Ø | Width Min. | Backflex Radius | Width Increment | Open Area |
|---|---|---|---|---|---|---|---|
| mm | 27.2 | 13.8 | 4.6 | 50.8 | 35 | 152.4 | 0 % |
| in | 1.071 | 0.543 | 0.181 | 2 | 1.378 | 6 |
| Dimension | mm | in |
|---|---|---|
| Pitch | 27.2 | 1.071 |
| Thickness | 13.8 | 0.543 |
| Pin Ø | 4.6 | 0.181 |
| Width Min. | 50.8 | 2 |
| Backflex Radius | 35 | 1.378 |
| Width Increment | 152.4 | 6 |
| Open Area | 0 % | |
| Belt Material | Rod Material | Working Load | Belt Weight | Temperature Range |
|---|---|---|---|---|
| PP + TPU | POM | 22000 N/m at 21°C | 6.4 kg/m² | 5–90 °C |
PP belt base with TPU friction top and POM connecting rods.
CHECK BEFORE ORDERING
Check dimensions. Match the parts.
Share belt or chain photos (both sides), sprocket and interface photos, key dimensions, conveyed product details, operating conditions and special requirements.
Check FitDimensions & installation
Provide belt or chain width, loop length and available installation and return clearance.
Allow for running clearance; nominal width alone is not an installation check.Sprockets & matching parts
Share sprocket photos, tooth count, shaft bore dimensions and equipment interfaces.
Matching pitch alone does not establish sprocket compatibility.Product & operating conditions
Provide product size and weight, line speed, transfer gaps, temperature and cleaning conditions.
Confirm the configuration for the actual process before ordering.PRODUCT QUESTIONS
FAQ
More answers about product selection, installation and maintenance.
What is the friction top made of?
This configuration combines a PP modular base with black TPU friction pads and POM connecting rods. The textured top provides product contact; select it together with the conveyed material and operating conditions.
Can this belt be used on an incline?
The friction top is intended for applications needing product grip. An inclined tire conveyor must be assessed using the tire orientation, contact surface, moisture, speed, load and conveyor layout. Share these conditions so the required configuration can be checked.
What dimensions are needed before ordering?
Provide the required finished belt width and loop length, available return clearance, and sprocket tooth count and shaft bore. Standard width combinations use 152.4 mm increments; confirm the exact module arrangement and finished width for your conveyor.
PLAN YOUR INSTALLATION
Product Documents
Get belt specifications, sprocket data and installation drawings to check dimensions and plan your equipment.
Dimensions & materials
Dimensions, materials, working load and operating conditions.
Sprockets & drive fit
Tooth counts, bore sizes and sprocket dimensions for drive matching.
Drawings & installation
Product geometry, mounting dimensions and installation clearances.
Tell us the model and the documents you need for selection or installation.
Request Documents
