Flat Top Belt for Glass and PET Bottles
XCY25401A- Pitch
- 25.4 mm
- Thickness
- 8.7 mm
- Pin Ø
- 4.5 mm
- Width Min.
- 85 mm
- Backflex Radius
- 25 mm
XCY25405T · Modular belts
Raised Rib Modular Conveyor Belt
Raised ribs support packs above an open belt surface. A 25.4 mm pitch suits straight conveyor sections with matched discharge equipment.
Product Inquiry
10hours
Usual reply time
Similar & related products
CHECK THE DETAILS
Specifications
Compare belt dimensions and material performance to check your conveyor fit, load and operating conditions.
| Units | Pitch | Thickness | Pin Ø | Width Min. | Backflex Radius | Width Increment | Open Area |
|---|---|---|---|---|---|---|---|
| mm | 25.4 | 5 | 30 | 76 | |||
| in | 1 | 0.197 | 1.181 | 2.992 |
| Dimension | mm | in |
|---|---|---|
| Pitch | 25.4 | 1 |
| Thickness | ||
| Pin Ø | 5 | 0.197 |
| Width Min. | ||
| Backflex Radius | 30 | 1.181 |
| Width Increment | 76 | 2.992 |
| Open Area | ||
| Belt Material | Rod Material | Working Load | Belt Weight | Temperature Range |
|---|---|---|---|---|
| POM | PP | 21000 N/m at 21 °C | 8.9 kg/m² | 0–85 °C |
| POM | PA | 23500 N/m at 21 °C | 9.0 kg/m² | -5–85 °C |
| PP | PP | 15000 N/m at 21 °C | 5.5 kg/m² | 0–105 °C |
Standard nominal width: W = 76 × N mm, where N is the whole-number count of 76 mm width units. Module widths: 76 / 152 mm. Actual width can be 0.1–0.3% below nominal due to material shrinkage. Allow clearance for the raised profile at transfers and along the return path.
CHECK BEFORE ORDERING
Check dimensions. Match the parts.
Share belt or chain photos (both sides), sprocket and interface photos, key dimensions, conveyed product details, operating conditions and special requirements.
Check FitDimensions & rib-top level
Provide belt width, loop length, rib-top and receiving heights, and installation and return clearance.
Use rib-top level as the transfer reference and allow clearance for the full raised profile.Sprockets & transfer interfaces
Share sprocket photos, tooth count, shaft bore dimensions, and transfer plate drawings with finger spacing and mounting details.
Match finger spacing, rib clearance and mounting to the belt; matching pitch alone does not establish fit.Product base & operating conditions
Provide product base photos, contact dimensions, stiffness and weight, line speed, transfer gaps, temperature and cleaning conditions.
The product base must span the ribs and openings with enough contact for support.PRODUCT QUESTIONS
FAQ
More answers about product selection, installation and maintenance.
Can I replace a flat belt without adjusting the discharge?
The rib-top level must be included in the discharge setup. Check the receiving height and product base contact before retaining the existing transfer arrangement.
Does the belt include a transfer comb?
A transfer comb is a separate interface component. Its fingers, clearances and mounting must match the rib geometry; the belt alone does not establish that fit.
How should cleaning access be arranged?
Provide access to the spaces between the ribs and to the return side. Select a cleaning method compatible with the chosen belt and rod materials.
PLAN YOUR INSTALLATION
Product Documents
Get belt specifications, sprocket data and installation drawings to check dimensions and plan your equipment.
Dimensions & materials
Dimensions, materials, working load and operating conditions.
Sprockets & drive fit
Tooth counts, bore sizes and sprocket dimensions for drive matching.
Drawings & installation
Product geometry, mounting dimensions and installation clearances.
Tell us the model and the documents you need for selection or installation.
Request Documents
