Friction Top Modular Belt for Tire Conveying
XCY27200J- Pitch
- 27.2 mm
- Thickness
- 13.8 mm
- Pin Ø
- 4.6 mm
- Width Min.
- 50.8 mm
- Backflex Radius
- 35 mm
XCY50804Z1 · Modular belts
Roller Top Modular Belt for Tire Handling
A 50.8 mm-pitch roller-top belt for tire handling, with a PP belt body, PA rods and 18% open area.
Product Inquiry
10hours
Usual reply time
Similar & related products
BUILT FOR YOUR PROCESS
Applications & Features
Review conveying applications, design features and operating conditions before choosing a belt or chain.
Tire handling before inspection stations
Tire handling
A roller top modular belt conveys finished tires toward inspection or handling stations.
Waiting at the station
An external stop can hold a tire while rollers accommodate relative movement in their direction.
Line setup
Match roller direction, guides, support and controls to tire size, weight and the required queue and waiting time.
Rolling contact at the product surface
Raised rollers support the product and turn when relative movement follows their direction. Check the tire base and contact footprint when selecting the layout.
Short-term accumulation before a station
Rollers accommodate relative movement when an external stop holds a tire. Match the stop, roller direction, support and controls to the load and queue.
Tire and wheel-handling conveyor layouts
Choose carrying width, support and guides for the tire footprint and weight. Sideways transfer requires suitable roller orientation and separate equipment.
Pricing & delivery
Share your required specifications, quantity, delivery location and target date, plus any special requirements. We aim to reply within 10 hours.
CHECK THE DETAILS
Specifications
Compare belt dimensions and material performance to check your conveyor fit, load and operating conditions.
| Units | Pitch | Thickness | Pin Ø | Width Min. | Backflex Radius | Width Increment | Open Area |
|---|---|---|---|---|---|---|---|
| mm | 50.8 | 20.5 | 6 | 254 | 100 | 50.8 | 18 % |
| in | 2 | 0.807 | 0.236 | 10 | 3.937 | 2 |
| Dimension | mm | in |
|---|---|---|
| Pitch | 50.8 | 2 |
| Thickness | 20.5 | 0.807 |
| Pin Ø | 6 | 0.236 |
| Width Min. | 254 | 10 |
| Backflex Radius | 100 | 3.937 |
| Width Increment | 50.8 | 2 |
| Open Area | 18 % | |
| Belt Material | Rod Material | Working Load | Belt Weight | Temperature Range |
|---|---|---|---|---|
| PP | PA | 26,000 N/m at 21°C | 12.1 kg/m² | 5–105 °C |
Working load is specified per metre of belt width. Assess the permitted load for the operating temperature, assembled width, belt support and drive configuration.
CHECK BEFORE ORDERING
Check dimensions. Match the parts.
Share belt or chain photos (both sides), sprocket and interface photos, key dimensions, conveyed product details, operating conditions and special requirements.
Check FitDimensions & installation
Provide belt or chain width, loop length and available installation and return clearance.
Allow for running clearance; nominal width alone is not an installation check.Sprockets & roller arrangement
Share sprocket photos, tooth count, shaft bore dimensions, roller direction, and stop/release and guide layouts.
Match the roller direction and external stop/release arrangement to the intended relative motion.Product & accumulation conditions
Provide tire position, base contact and weight, belt speed, queue length, waiting time, temperature and cleaning conditions.
Check product support and queue load for the planned waiting time and release cycle.PRODUCT QUESTIONS
FAQ
More answers about product selection, installation and maintenance.
Does the roller-top belt move tires sideways automatically?
Sideways movement requires the correct roller orientation and an external transfer or guiding mechanism. Confirm the required movement and receiving conveyor before selecting the configuration.
What information is needed to select the belt width?
Provide the required assembled belt width, tire or wheel dimensions, conveyor drawing and guide clearances. The listed minimum width is 254 mm with a 50.8 mm width increment; confirm the finished module combination for the selected material and conveyor.
Is 26,000 N/m the maximum weight of one tire?
No. It is the listed working load per metre of belt width at 21°C for the PP belt with PA rods. Assess the actual tire weight together with belt support, contact area, conveyor length, speed and operating temperature.
Can an existing 50.8 mm-pitch sprocket be reused?
Matching pitch alone does not confirm fit. Share the sprocket tooth profile, tooth count, shaft bore and photos of belt engagement so the drive and return clearances can be checked.
PLAN YOUR INSTALLATION
Product Documents
Get belt specifications, sprocket data and installation drawings to check dimensions and plan your equipment.
Dimensions & materials
Dimensions, materials, working load and operating conditions.
Sprockets & drive fit
Tooth counts, bore sizes and sprocket dimensions for drive matching.
Drawings & installation
Product geometry, mounting dimensions and installation clearances.
Tell us the model and the documents you need for selection or installation.
Request Documents
