Flat Top Modular Belt for Food and Packaging
XCY15200A- Pitch
- 15.24 mm
- Thickness
- 8.7 mm
- Pin Ø
- 4.5 mm
- Width Min.
- 152 mm
- Backflex Radius
- 25 mm
XCY15200B · Modular belts
Small Pitch Flush Grid Belt for Containers
A 15.24 mm-pitch flush grid belt with 28% open area for conveying containers and packaged products.
Product Inquiry
10hours
Usual reply time
Similar & related products
CHECK THE DETAILS
Specifications
Compare belt dimensions and material performance to check your conveyor fit, load and operating conditions.
| Units | Pitch | Thickness | Pin Ø | Width Min. | Backflex Radius | Width Increment | Open Area |
|---|---|---|---|---|---|---|---|
| mm | 15.24 | 9 | 4.5 | 25 | 152.4 | 28 % | |
| in | 0.6 | 0.354 | 0.177 | 0.984 | 6 |
| Dimension | mm | in |
|---|---|---|
| Pitch | 15.24 | 0.6 |
| Thickness | 9 | 0.354 |
| Pin Ø | 4.5 | 0.177 |
| Width Min. | ||
| Backflex Radius | 25 | 0.984 |
| Width Increment | 152.4 | 6 |
| Open Area | 28 % | |
| Belt Material | Rod Material | Working Load | Belt Weight | Temperature Range |
|---|---|---|---|---|
| POM | PP | 14000 N/m at 21 °C | 5.75 kg/m² | 0–85 °C |
| POM | PA | 12000 N/m at 21 °C | 5.75 kg/m² | -5–85 °C |
| PP | PP | 9000 N/m at 21 °C | 3.98 kg/m² | 0–105 °C |
| PE | PE | 7000 N/m at 21 °C | 4.2 kg/m² | -45–65 °C |
W is nominal belt width in mm. N counts 152.4 mm units for standard widths; n counts 25.4 mm increments added to the 76 mm base for non-standard widths. N and n are whole-number counts. Single module width: 50.8 / 101.6 / 152.4 mm. Standard nominal width: 152.4 × N mm. Non-standard nominal width: 76 + 25.4 × n mm.
CHECK BEFORE ORDERING
Check dimensions. Match the parts.
Share belt or chain photos (both sides), sprocket and interface photos, key dimensions, conveyed product details, operating conditions and special requirements.
Check FitDimensions & installation
Provide belt or chain width, loop length and available installation and return clearance.
Allow for running clearance; nominal width alone is not an installation check.Sprockets & matching parts
Share sprocket photos, tooth count, shaft bore dimensions and equipment interfaces.
Matching pitch alone does not establish sprocket compatibility.Product & operating conditions
Provide product size and weight, line speed, transfer gaps, temperature and cleaning conditions.
Confirm the configuration for the actual process before ordering.PRODUCT QUESTIONS
FAQ
More answers about product selection, installation and maintenance.
Will the open grid dry containers before labelling?
The openings let free liquid pass through; they do not establish that a container surface is dry. The remaining water, line speed and required drying stage must be assessed for the labelling process.
Does the small pitch define the transfer gap for a container?
The usable gap also depends on the conveyor end, sprockets, transfer plate and container base. Check the container crossing the complete transfer arrangement rather than sizing the gap from pitch alone.
Can I select a belt body and then choose any rod material?
Select one of the listed belt and rod combinations. The corresponding load and operating range apply to that complete row; do not combine values from different rows.
Can I reuse sprockets from a 15200A belt?
Do not assume compatibility. The 15200B sprocket page specifically excludes 15200A. Provide the existing drive dimensions for a fit review.
PLAN YOUR INSTALLATION
Product Documents
Get belt specifications, sprocket data and installation drawings to check dimensions and plan your equipment.
Dimensions & materials
Dimensions, materials, working load and operating conditions.
Sprockets & drive fit
Tooth counts, bore sizes and sprocket dimensions for drive matching.
Drawings & installation
Product geometry, mounting dimensions and installation clearances.
Tell us the model and the documents you need for selection or installation.
Request Documents
